3.4 PM PARTS SETTINGS
3.4.1 PM PARTS REPLACEMENT PROCEDURE
Since the machine detects a new PCDU and fusing unit automatically, you do not need to
set "Manual New Unit Set" with an SP.
1.
Enter the SP mode.
2.
Output the SMC logging data with SP5-990-004.
3.
Set the following SPs to "1".
Item
PCU
Development Unit
PTR (Paper Transfer) Unit
Fusing Unit
ADF
SM
SP
PCU: SP3-701-002
Cleaning Blade: SP3-701-009
Charge Roller: SP3-701-018
Cleaner: Charge Roller (Cleaning
Roller): SP3-701-019
OPC: SP3-701-021
Separation Pawl (Pick-off Pawls):
SP3-701-022
Development Unit: SP3-701-023
Development (Developer): SP3-701-024
Development Filter: SP3-701-025
Bearings: Development Screw
(Development Mixing Auger Bearings):
SP3-701-028
SP3-701-108
Fusing Unit: SP3-701-115
Fusing Belt (Heating Sleeve Belt Unit):
SP3-701-116
Pressure Roller: SP3-701-118
Pressure Roller Bearings: SP3-701-119
ADF: Pick-up Roller: SP3-701-206
ADF: Feeding Belt: SP3-701-207
ADF: Reverse Roller: SP3-701-208
3-9
D197/D198/D199/D200/D201/D202
PM Parts Settings