Ricoh D197 Service Manual page 809

SP Mode Tables - SP6000-2
[FIN (1K FIN) OUTPUT Check]
6162
See page 5-355
6180 [M-ScanBindPosAdj:NoStplBindFIN]
-
Adjusts the position of width direction (main scan direction) for binding.
6-180-001

Value increase: The bind position moves toward outside of sheets.

Value decrease: The bind position moves toward inside of sheets.
6181 [BindSpeedSetting:NoStplBindFIN]
-
Improves the noise for bind finishing by adjusting the bind speed.
6-181-001
1: Bind Spd1(L) (Low noise mode)
3: Bind Speed 3 (Productivity mode)
6182 [ExitSpeedSwitch:NoStplBindFIN]
Adjusts the paper exit speed to align the stacked sheets properly.

Value increase: increases the paper exit speed.

Value decrease: decreases the paper exit speed.
1:Exit Spd1(L)
2:Exit Speed 2
3:Exit Speed 3
4:Exit Speed 4
5:Exit Speed 5(High)
6-182-001 PaperLength:297.0-457.2mm,Thick(106-300g/m2) ENG [1 to 5 / 2 / 1/step]
6-182-002 PaperLength:297.0-457.2mm,Plain(60-105g/m2)
6-182-003 PaperLength:297.0-457.2mm,Thin(52-59g/m2)
6-182-004 PaperLength:210.0-296.9mm,Thick(106-300g/m2) ENG [1 to 5 / 2 / 1/step]
D197/D198/D199/D200/D201/D202
ENG [-1.0 to 1.0 / 0.0 / 0.5mm/step]
ENG [1 to 3 / 3 / 2/step]
5-234
ENG [1 to 5 / 2 / 1/step]
ENG [1 to 5 / 4 / 1/step]
SM