Main Machine Installation
Completion
1.
If the optional bridge unit is not to be installed, swing the sensor feeler [A] out.
2.
Install the optional ARDF or the optional platen cover (page 2-59, page 2-56).
3.
Pull out trays, and then adjust the side fences and end fence to match the paper size.
To move the side fences, first pull out the tray fully, then push down the green lock at
the rear of the tray.
4.
Connect the power cord to the inlet of the main machine.
2.2.5 SECURITY SETTINGS
The machine contains the Security functions (Data Overwrite Security and HDD Encryption unit)
in the controller board.
When installing a new machine, it is recommended to activate the Data Overwrite Security and
HDD Encryption by selecting "Format All Data" from "System Settings" on the operation panel. For
details, refer to the "Security Settings page 2-275".
D197/D198/D199/D200/D201/D202
2-22
SM