Installation - Ricoh D197 Service Manual

Hard Disk Drive Option Type M12

2.37.2 INSTALLATION


Turn off the main power and disconnect the power supply cord.
1. Remove the controller cover (page 4-11).
2. Remove the controller rear cover (page 4-15).
3. Connect the cables [A] [B] to the HDD [C], and then attach the HDD [C] to the bracket
[D] ( x4).
4. Connect the cables of the HDD to the controller board [A], and then hang the HDD [B]
on the hook of the controller box (
5. Secure the HDD [B] (
6. Reassemble the removed covers.
7. Plug the power cord and turn on the main power of the machine.
D197/D198/D199/D200/D201/D202
x2).
x3).
2-244 SM