Ricoh D197 Service Manual page 841

SP Mode Tables - SP7000-2
[ServiceSP Entry Code Chg Hist]
Records dates and times of resetting / changing "Service SP mode switch
7840 code setting" for the recent 2 times.
(Decides whether the record is for setting changes or resets by branch
number.)
7-840-001 Change Time :Latest
7-840-002 Change Time : Last1
7-840-101 Initialize Time : Latest
7-840-102 Initialize Time : Last1
7852 [DF Glass Dust Check]
Dust Detection
Counter
Records the times detecting dust at all points of front side scan position.
001
When there is a dust even when before starting the next job, consider as
same dust and doesn't count. Counts when SP4-020-001: DF scan glass
part dust detect front is ON.
Dust Counter Clear
Counter
For checking front side scan position move effect. Counts the times that
002
strips were avoided by detecting dust and move the sheet thrugh DF scan
position. Counts when SP4-020-001: DF scan glass part dust detect front
is ON.
Dust Detection
Counter: Back
For Single Path simultaneous duplex models only. Records the times
003
detecting dust at all points of rear side scan position. When there is a
same dust even when before starting the next job, consider as same dust
and doesn't count. * Counts when SP4-020-011: DF
D197/D198/D199/D200/D201/D202
*CTL [- / - / - ]
*CTL [- / - / - ]
*CTL [- / - / - ]
*CTL [- / - / - ]
*ENG [0 to 65535 / 0 / 1/step]
*ENG [0 to 65535 / 0 / 1/step]
*ENG [0 to 65535 / 0 / 1/step]
5-266 SM