Transfer Roller Unit - Ricoh D197 Service Manual

4.11.2 TRANSFER ROLLER UNIT


Before replacing the Transfer roller unit, set the setting of SP3-701-108 to "1" and turn off
the main power switch.

If you have to turn the power on again before replacing the part, execute the SP again
before replacing the part.

After replacing the Transfer roller unit, turn on the main power on.
1. Open the right cover.
2. Release the claws of the transfer roller unit [A].
3. Transfer roller unit [A]
SM 4-101 D197/D198/D199/D200/D201/D202
Transfer Unit