Table of Contents
Advertisement
Engage the gear [B] of the punch stepping motor unit with the rack [C] of the punch
unit.
13. Connect the harness of the hopper sensor to the connector of the finisher.
14. Connect the harness of the punch unit to the connector of the registration drive unit.
SM
2-111
D197/D198/D199/D200/D201/D202
Punch Unit PU3060
- Quick Links:
- D197/D198/D199/D200/D201/D202
- Fusing Unit
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
