Ricoh D197 Service Manual page 917

Printer SP Mode
bit 4 DFU
bit 5 DFU
bit 6 PCL, RPCS, PS: Forced BW print
Switches whether to ignore PDL color command.
bit 7 [PDF]: Orientation Auto Detect Fuction
Automatically chooses page orientations of PDF jobs (Landscape or
Portrait) based on the content.
1001 [Bit Switch]
009 Bit Switch 9 Setting
bit 0 PDL Auto Detection timeout of jobs
submitted via USB or Parallel Port (IEEE
1284).
To be used if PDL auto-detection fails. A failure of PDL autodetection doesn't
necessarily mean that the job can't be printed. This bit switch tells the device
whether to time-out immediately (default) upon failure or to wait 10 seconds.
bit 1 DFU
bit 2 Job Cancel
If this bit switch, all jobs will be cancelled after a jam occurs.
Note: If this bitsw is enabled, printing under the following conditions might
result in problems:
- Job submission via USB or Parallel Port
- Spool printing (WIM >Configuration > Device Settings > System)
D197/D198/D199/D200/D201/D202
Enabled
Enabled
Disabled
(Immediately)
Disabled
cancelled)
5-342
- -
- -
Disabled
Disabled
0 1
Enabled
(10 seconds)
- -
Enabled
(Not
(Cancelled)
SM