Ricoh D197 Service Manual page 221

14. Secure the bottom plate [A] (
15. Attach the paper exit cover [A] and the connector cover [B].

Up to this point, the procedure is the same as punch unit installation. If the Punch
Unit PU3040 is to be installed, refer to the Step 3 and later of the installation
procedure (page 2-155).
16. Attach the main power switch cover and close the right cover (
17. Slide the finisher front right cover [A] from left to right, and then attach it (
SM
×3).
2-151
Internal Finisher SR3130
×1).
×1).
D197/D198/D199/D200/D201/D202