Ricoh D197 Service Manual page 811

SP Mode Tables - SP6000-2
[Extra]
More than the standard number of sheets can be stapled. This SP sets the
additional number of sheets (This Setting + Standard Number = maximum
number of sheets).

If the number of the maximum for staples is increased, and the
6830
mechanical warranty of the unit can be guaranteed, then the setting
can take effect without changing the controller software.
However, assurance that mechanical performance can be guaranteed is
required before changing the setting to increase the staple load for more
than the maximum in the feed/exit specifications. Raising this setting
without quality assurance could damage the machine.
6-830-001 Staples 0 to 50 (Initial: 0) *CTL
Saddles 0 to 50 (Initial:
6-830-002
0)
Half-Fold 0 to 50 (Initial:
6-830-003
0)
D197/D198/D199/D200/D201/D202
[0 to 50 / 0 / 1/step]
*CTL [0 to 50 / 0 / 1/step]
*CTL [0 to 50 / 0 / 1/step]
5-236 SM