4. Turn on the main power.
5. Press "Enter" in SP5-878-004 (Option Setup: OCR Dictionary).
The SD card ID is saved in the NVRAM, and the ID of the MFP is saved on the SD card. The
MFP and SD card are thereby linked.
6. When "operation complete" is displayed, press "Close".
If installation fails, "Failed" is displayed.
If installation fails, perform the following steps.
1. Check whether it is a used SD card.
2. Turn the main power OFF, and repeat steps 1-5.
7. Turn the main power OFF/ON.
8. Press "Enter" in SP5-878-004 (Option Setup: OCR Dictionary).
Dictionary data is copied to the HDD.
On the first run, SP5-878-004 links the SD card, and on the second run, copies
dictionary data.
9. Turn the main power OFF, and remove the SD card from the SD card slot.
SM
2-251
D197/D198/D199/D200/D201/D202
OCR Unit Type M2