Ricoh D197 Service Manual page 802

[Main-scan Punch Pos Adj:1K FIN]
Adjusts position of width direction (main scan direction) for punch.

Adjusting value to -: hole position moves toward front side of
6144
machine.

Adjusting value to +: hole position moves toward rear side of
machine.
6-144-001 JPN/EU: 2-Hole
6-144-002 NA: 3-Hole
6-144-003 Europe: 4-Hole
6-144-004 NEU: 4-Hole
6-144-005 NA: 2-Hole
[Skew Correct Buckle Adj:1K FIN]
Adjusts the skew correction bending amount when punching specified
6145
paper.

Adjusts value to -: buckling amount decreases

Adjusts value to +:buckling amount increases.
6-145-001 A3 SEF
6-145-002 B4 SEF
6-145-003 A4 SEF
6-145-004 A4 LEF
6-145-005 B5 SEF
6-145-006 B5 LEF
6-145-007 A5 LEF
6-145-008 DLT SEF
6-145-009 LG SEF
6-145-010 LT SEF
6-145-011 LT LEF
SM
ENG
ENG
ENG [-2.0 to 2.0 / 0.0 / 0.4mm/step]
ENG
ENG
ENG
ENG
ENG [-5.0 to 5.0 / 0.0 / 0.2mm/step]
ENG
ENG
ENG
ENG
ENG [-5.0 to 5.0 / 0.0 / 0.2mm/step]
ENG
ENG
ENG [-5.0 to 5.0 / 0.0 / 0.2mm/step]
5-227 D197/D198/D199/D200/D201/D202
SP Mode Tables - SP6000-2