Ricoh D197 Service Manual page 799

SP Mode Tables - SP6000-2
[Staple Position Adj: FrontFIN]
Adjusts staple position (main scan direction) for the near side parallel
stitch/ far side parallel stitch of specified paper.
6133

Adjusting value to -: staple position moves toward front side of
machine.

Adjusting value to +: staple position moves toward rear side of
machine.
6-133-001 Finisher1
[INPUT Check: FrontFIN]
6135
See page 5-355
[OUTPUT Check: FrontFIN]
6136
See page 5-355
[Staple Position Adj: 1K FIN]
Adjusts staple position (main scan direction) for near side trailing edge
parallel stitch / far side trailing edge parallel stitch.
6140

Adjusting value to -: staple position moves toward front side of
machine.

Adjusting value to +: staple position moves toward rear side of
machine.
6-140-001 -
[Booklet Stapler Pos Adj:1K FIN]
Adjusts saddle stitch staple position (sub scan direction) of specified
paper.
6141

Adjusting value to -: staple position moves toward trailing edge of
paper when intaking.

Adjusting value to +: folding position moves toward leading edge of
paper when intaking.
D197/D198/D199/D200/D201/D202
*ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
ENG [-3.5 to 3.5 / 0.0 / 0.5mm/step]
5-224 SM