Ricoh D197 Service Manual page 1001

Updating JavaVM
Error Message
PIECEMARK
Error,machine=XXXXX
pasePut() - error : The file of
the
copy origin is not found
Put Error!
paseCopy() - error : The file
of the copy origin is not
found.
Copy Error!
[file name: XX] error,No
space
left on device
pasePut() - error : The
destination directory cannot
be
made.
pasePut() - error : fileCopy
Error.
Put Error!
[file name: XX] error,No
space
left on device
paseCopy() - error : The
destination directory cannot
be
made.
paseCopy() - error : fileCopy
Error.
Copy Error!
Put Error! *1
Copy Error! *1
D197/D198/D199/D200/D201/D202
Cause
Applied the wrong updating
tool (Using the updating tool
of a different model)
Inadequacy with the SD
card for updating
(Files are missing in the
updating tool)
Inadequacy SD card for
updating
(Files in the updating tool
are missing)
Writing destination is full.
(The NAND flash memory
on the controller board is
full.)
Writing destination is full.
(The NAND flash memory
on the controller board is
full.)
Error, not normally expected
to occur
5-426
Remedy
Use the correct updating
tool for this model.
Re-create the SD card for
updating.
Inadequacy SD card for
updating
(Files in the updating tool
are missing)
Uninstall the unnecessary
SDK applications.
If you can not uninstall it,
implement escalation,
stating the "model name,
application configuration,
SMC sheet
(SP5-990-006/024/025),
and error file."
Uninstall the unnecessary
SDK applications.
If you can not uninstall it,
implement escalation
stating the "model name,
application configuration,
SMC sheet
(SP5-990-006/024/025),
and error file."
If you cannot uninstall it,
implement escalation
SM