User Tool Settings For Ieee 802.11A/G/N - Ricoh D197 Service Manual

IEEE 802.11a/g/n Interface Unit Type M2
9. Set the cables of Antenna 1 and Antenna 2 in the clamps and close them.
10. Print out the "Configuration Page", and then check if this option is correctly
recognized.

User Tools/Counter > Printer Features > List/Test Page > Configuration Page

2.32.3 USER TOOL SETTINGS FOR IEEE 802.11A/G/N

Go into the User Tools mode and do the procedure below. These settings take effect every time
the machine is powered on.

You cannot use IEEE 802.11a/g/n if you use Ethernet.
1. Press the "User Tools" key.
2. On the touch panel, touch "System Settings".

Select "Interface Settings"> "Network" > "LAN Type". The "LAN Type" (default:
Ethernet) must be set for either Ethernet or wireless LAN.
3. Select "Interface Settings"> "Wireless LAN". Only the wireless LAN options show.
4. Set the "Communication Mode".
5. Enter the "SSID setting". (The setting is case sensitive.)
6. Set the "Ad-hoc Channel". You need this setting when Ad Hoc Mode is selected.
Range: 1-13, 36, 40, 44 and 48 channels (default: 11)
7. Set the "Security Method" to specify the encryption of the Wireless LAN.

The "WEP" (Wired Equivalent Privacy) setting is designed to protect wireless data
transmission. The same WEP key is required on the receiving side in order to unlock
encoded data. There are 64 bit and 128 bit WEP keys.
Range of Allowed Settings:
64 bit: 10 characters
128 bit: 26 characters
D197/D198/D199/D200/D201/D202 2-226 SM