Ricoh D197 Service Manual page 863

SP Mode Tables - SP8000-1

For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)

The first test print and subsequent test prints to adjust settings are added to the number of
pages of the copy job (SP 8072).

When printing the first page of a job from within the document server screen, the page is
counted.
[T:FAX TX Jobs]
These SPs count the total number of jobs (color or black-and-white) sent by
8111
fax, either directly or using a file stored on the document server, on a
telephone line.
Note: Color fax sending is not available at this time.
001 B/W
[F: FAX TX Jobs]
These SPs count the total number of jobs (color or black-and-white) sent by
8113
fax directly on a telephone line.
Note: Color fax sending is not available at this time.
001 B/W

These counters count jobs, not pages.

This SP counts fax jobs sent over a telephone line with a fax application, including documents
stored on the document server.

If the mode is changed during the job, the job will count with the mode set when the job
started.

If the same document is faxed to both a public fax line and an I-Fax at a destination where
both are available, then this counter increments, and the I-Fax counter (8 12x) also
increments.

The fax job is counted when the job is scanned for sending, not when the job is sent.
D197/D198/D199/D200/D201/D202
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
5-288 SM