Ricoh D197 Service Manual page 940

Bridge Exit Sensor
5-803-078
Responds to paper existence on paper exit sensor position or bridge unit.
(0: paper exist, 1: paper non exist)
Relay Set Detection Mechanism
5-803-079
Detects that bridge unit is set to main unit.
(10: set, 11:not set)
RelayTransCov OP
Detect/LeftTransCov OP Sn
5-803-082
Detects open/close of the relay exit cover open/close sensor (bridge unit)
and the left transport cover open/close sensor (left exit tray).
(0: close, 1: open)
RelayPprExitCovOP
Detect/UpperTransCovOP Sn
5-803-083
Detects open/close of the relay exit cover open/close sensor (bridge unit)
and the upper transport cover open/close sensor (left exit tray).
(0: close, 1: open)
Shift Tray Set Detection
Mechanism
5-803-084
Detects that shift tray is set to main unit.
(01: set, 11:not set)
SM
[0 or 1 / 0 / 1/step]
ENG 0: Paper exist
1: Paper do not exist
[0 or 1 / 0 / 1/step]
ENG 0: set
1:not set
[0 or 1 / 0 / 1/step]
ENG 0: close
1: open
[0 or 1 / 0 / 1/step]
ENG 0: close
1: open
[0 or 1 / 0 / 1/step]
ENG 01: set
11:not set
5-365 D197/D198/D199/D200/D201/D202
Input Check Table