For Installing Directly Under The Main Machine - Ricoh D197 Service Manual

For Installing Directly under the Main Machine

1. Attach the 3 locating pins.
2. Holding the grips on the machine, align with the locating pin, and place the machine on
the caster table.

When you lift the machine, hold the lifting handles.

In particular, do not lift it by holding the scanner unit, etc., (as it may deform).

Do not put the machine down on the caster table as a temporary resting place. This
may cause the machine to deform. Always connect the machine and caster unit
properly.
3. Attach the right lower cover between the right side of the main machine and the caster
table.
4. Pull out the 2nd paper feed tray of the machine.
5. Using a securing bracket, fix the machine or paper feed unit to the caster table (spring
washer : screw: M4×10: 1).
6. Attach the securing brackets [A] at 2 positions to left and right at the rear of the
machine or paper feed unit (screws: 1 each).
SM 2-53 D197/D198/D199/D200/D201/D202
Caster Table Type M3