Charge Roller, Cleaning Roller - Ricoh D197 Service Manual

PCDU

4.9.5 CHARGE ROLLER, CLEANING ROLLER


Before replacing these rollers, set the setting of SP3-701-018 for the charge roller and/or
SP3-701-019 for the cleaning roller to "1" and turn the main power switch OFF.

If you have to turn the power on again before replacing the part, execute the SP again
before replacing the part.

After replacing the rollers, turn the main power switch ON.
1. PCU (page 4-74)
2. OPC drum (page 4-77)
3. Charge roller and cleaning roller [A] with its bearing
4. Split the assembly into the charge roller [A] and cleaning roller [B].
D197/D198/D199/D200/D201/D202 4-78 SM