Ricoh D197 Service Manual page 677

SP Mode Tables - SP5000-1
Duplex Printout
5-212-003
Right/Left Position
Duplex Printout
5-212-004
High/Low Position
5227 [Page Numbering]
5-227-201 Allow Page No. Entry
5-227-202 Zero Surplus Setting
D197/D198/D199/D200/D201/D202
[-10 to 10 / 0.00 / 1mm/step]
Specifies relative positions between
*CTL the face page numbering position
against the back page numbering
position.
[-10 to 10 / 0.00 / 1mm/step]
Specifies relative positions between
*CTL the face page numbering position
against the back page numbering
position.
[2 to 9 / 9 / 1/step]
Specifies input available figure length
*CTL of "Job serial numbers page print out
starts number" that specified by
optional text print out.
[0 or 1 / 0 / 1/step]
0:OFF
1:ON
*CTL Specifies zero suppression of "Job
serial numbers page print out starts
number" that specified by optional text
print out.
5-102 SM