Ricoh D197 Service Manual page 778

T-Edge Erase (1-Pass):
Rear
For SPDF models only. Adjusts the erase margin of the rear side at the
6-006-015
original trailing edge for SPDF.

Value increase: add trailing edge to image.

Value decrease: erases trailing edge of image.
[ADF INPUT Check]
6007
See page 5-355 "Input Check Table".
[ADF OUTPUT Check]
6008
See page 5-387 "Output Check Table".
[Stamp Position Adj.]
Adjusts stamping position of DONE stamp.
6010

Value increase: Moves stamp position towards original trailing edge.

Value decrease: Moves stamp position towards original leading edge.
6-010-001 -
[1-Pass ADF INPUT Check]
6011
See page 5-355 "Input Check Table".
[1-Pass ADF OUTPUT Check]
6012
See page 5-387 "Output Check Table".
SM
*ENG [-5.0 to 5.0 / -1.5 / 0.1 mm/step]
*ENG [-5.0 to 5.0 / 0.0 / 0.1 mm/step]
5-203 D197/D198/D199/D200/D201/D202
SP Mode Tables - SP6000-1