Ricoh D197 Service Manual page 168

Booklet Finisher SR3170 / Finisher SR3160
7. Only for D688, attach the booklet tray [A].
8. Attach the relay guide plate [A] (
9. Attach the ground plate [A] (
10. Attach the joint bracket [A] to the machine (
At this time, tighten the bracket [A] and the bridge unit bracket [B] together.

As the default setting, the screw head is placed at the center of the scale of the rear
side.

The joint bracket [A] must be placed under the bridge unit bracket [B].
D197/D198/D199/D200/D201/D202
×2).
×2).
×4).
2-98 SM