Scanner Drive Wire Replacement - Ricoh Robin Service Manual

OPTICS

2.7 SCANNER DRIVE WIRE REPLACEMENT

2.7.1 Wire Removal
[C]
[F]
[D]
1. Remove the following covers and parts.
Platen cover (if installed)
Upper rear cover
Exposure glass
2. Loosen the screw securing the rear first scanner wire clamp [A].
3. Remove the front first scanner wire clamp [B].
4. Remove the front and rear wire tightening springs [C].
5. Loosen the screws securing the front and rear wire fixing plates [D].
6. Remove the scanner wires [E] from the left side plate.
7. Remove the scanner wires (four wires) from the drive pulley [F].
8. Remove the drive pulley (1 E-ring).
[D]
[A]
[E]
Document feeder (if installed)
Upper cover
Operation panel
5-14
24 June 1994
[C]
[B]
[E]