Configuring Open Trunking; Enabling Embedded Web Server; Enabling Telnet; Connecting Cables To The Fibre Channel Ports - HP StorageWorks Director 2/140 Installation Manual

Configuring Open Trunking

This option is only available if the optional Open Trunking feature is installed.
Choosing this option opens the Configure Open Trunking dialog box. For details
on enabling Open Trunking and configuring such parameters as congestion
thresholds for ports, event notification options, and low BB credit threshold, refer
to the HP StorageWorks Director Element Manager User Guide.

Enabling Embedded Web Server

Use the following steps to enable EWS:
1. At the Hardware View page, choose Configure > Enable Web Server.
2. Choose Enable Web Server again to remove the check mark and disable the
For complete procedures on using EWS, refer to the HP StorageWorks Embedded
Web Server User Guide.

Enabling Telnet

Use the following steps to enable Telnet:
1. At the Hardware View, choose Configure > Enable Telnet. Choosing
2. Choose Enable Telnet again to remove the check mark and disable telnet

Connecting Cables to the Fibre Channel Ports

Use these steps to connect Fibre Channel port cables:
1. Route the fiber-optic cables from customer-specified devices to ports at the
2. Bundle Fibre Channel cables from the director and other equipment (groups
3. Set the director online. For instructions, see
Director 2/140 Installation Guide
Choosing Enable Web Server automatically places a check mark in the
check box.
EWS interface. When disabled, remote users cannot access the interface.
Enable Telnet automatically places a check mark in the check box.
access. When disabled, remote users cannot access the director through telnet.
front of the Director.
of 16 maximum), and secure them as directed by the customer.
page 68.
Installing and Configuring the Director
"Setting the Director Online" on
91