Changing The Brightness Of The Screen - GE MAC VU360 Operator's Manual

Icon
For more information about wireless certificate errors, see
Connectivity Errors on page
3. Close the Network Status window by selecting something on the screen outside
of the window.

Changing the Brightness of the Screen

Perform one of the following steps to change the brightness level of the screen
from 10% to 100%:
NOTE:
• To increase the brightness of the screen, select Alt + Arrow up keys on the
• To decrease the brightness of the screen, select Alt + Arrow down keys on the
Continue to select the keys to reach the desired level of brightness.
Table 6: Brightness Level
Condition
Brightness level on initial
power up
Brightness level when you
change the power source
when the device is on
The changes you make are automatically saved to your device and will not
change when you turn the device on or off.
2088531-370-2
Status
WLAN Connected
WLAN Disconnected
The specified keys combination works only for English keyboard.
keyboard.
keyboard.
MAC VU360
Description
The device is connected to an access point and is in the
process of obtaining an IP address.
If this icon is blinking, the device is acquiring an IP
address from DHCP.
The device is not connected to a WLAN.
128.
When the device is powered
by A/C Power
80%
Resets to the saved
brightness value when the
device was last used on AC
Power.
™ Resting ECG Analysis System
Product Overview
Wireless Network
When the device is powered
by the battery
50%
Resets to the saved
brightness value when the
device was last used on the
battery.
19