Recommended Separation Distances From Portable And Mobile Rf Communications Equipment, Table 206 - GE SEER 1000 Operating Manual

Recommended Separation Distances from Portable and
Mobile RF Communications Equipment, Table 206
Recommended separation distances between portable and mobile RF communications equip-
ment and the device
The device is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the device can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the device as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum output
power of transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters [m] can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts [W] according
to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects, and people.
2067634-077 Revision B
Separation distance according to frequency of transmitter [m]
150 kHz to 80 MHz
d = 1.2 P
0.12
0.37
1.17
3.69
11.67
SEER™ 1000
80 MHz to 800 MHz
d = 1.2 P
0.12
0.37
1.17
3.69
11.67
Specifications
800 MHz to 2.5 GHz
d = 2.3 P
0.23
0.74
2.34
7.38
23.33
103