Nmea Output; Engine - LXNAV LX80XX User Manual

Operating Modes
5.1.11.12

NMEA Output

The main display unit is capable of transmitting position data sentences in NMEA format for
use by other devices.
Port defines on which serial interface data will be transmitted. Baud rate defines
transmission speed. Data is divided into three groups:
 GPS data will output all GPS-related data such as time, longitude and altitude.
 LXNAV data will output all variometer-related data such as vario, MacCready and
ballast.
 Flarm data will output all Flarm-related data.
PDA can be connected to the LX80/90xx system through the NMEA bridge or on
the EXT.(PC) port.
NMEA data is available also on Flarm display port on main display unit and rear
display unit at 19200bps. However only Flarm data and GPS data.
5.1.11.13

Engine *

Use this menu, when the system is installed into glider with engine. The current engine
noise level is shown as a progress bar. If external MOP sensor is installed also MOP level
will be shown.
Page 95 of 192
Version 6.03, May 2017