Remote Stick; Version 6.03, May - LXNAV LX80XX User Manual

Operating Modes
other device. Please note that it is not necessary to have this waypoint in your databases as
the complete waypoint information is transferred.
If the Waypoint checkbox is not checked it is still possible to send a target to the other
device using the SEND action in waypoint mode.
The same applies to the Airport checkbox.
displayed.
If the Task checkbox is checked the task will be synchronised with the other device.
When flying an assigned area task it is worth not having the task checkbox
checked. This will allow one pilot to play with "what if" scenarios. Once a proper
direction is found you can send the task to the other device using the SEND
action in task mode.
5.1.11.10

Remote stick*

When a remote stick is connected to the system, it is possible to define type of remote stick
via this menu. In case LXNAV remote stick with six buttons is connected, user can specify
functionality of function button. There are several options available for function button:
 SC toogle button will toggle variometer between speed to fly mode and vario
mode.
 Vario priority will temporary put variometer in vario mode regardless of other
setting for speed to fly.
 Toggle vario range will toggle between vario range 2.5m/s, 5m/s or 10m/s.
 VOLUME will call volume menu on screen.
 Toggle map settings will toggle between two stored map settings.

Toggle thermal mode will enter thermal mode or exit thermal mode.
 SELECT will call airport select menu or waypoint select menu or task edit depending
on current navigational page.
 MC/BAL will open MacCready and ballast dialog.
 MAP will open map properties dialog.
 WIND will open wind selection dialog.
 AIRSPACE will open airspace zones dialog.
 MARK will create a waypoint or marker at current position.
 FLARM will display a list with all Flarm objects in vicinity.
 PAN will set navigational screen into pan mode.
 EVENT will mark an event into recorded IGC file
 ROT.FAI will rotate FAI triangle area, if shown on navigational screen.
 TEAM opens dialog to enter team partner code.
The message
Page 93 of 192

Version 6.03, May 2017

"Airport target received"
is