Ahrs - LXNAV LX80XX User Manual

Operating Modes
 Radio will call radio menu on screen.
 Transponder will call transponder menu instantly on screen.
 Screenshot will make a screenshot.
On remote sticks from 2016 and onward there are two function buttons available. Also SC
button in front of stick is available for any of above functions.
Check Use stick for front seat if there are two remote sticks installed and system without
rear seat device (e.g. Pipistrel Taurus, Stemme)
To activate Function button press FN on remote stick and the field in the menu
will become active, same procedure is for the Front SC button.
5.1.11.11

AHRS*

When AHRS device is connected to the system or AHRS option on V9/V8/V80 is enabled, this
menu is used to calibrate AHRS for installation error.
Place you glider in levelled position and press LEVEL button. You can also modify pitch
offset, if you rotate PAGE selector knob. More detailed can be pitch set using pitch offset
spin control.
Mode defines modes of operation of AHRS. AHRS can be switched to OFF mode. This will be
shown in the IGC file as a BFI sentence. If the AHRS is active there will be written BFION
AHRS option is not enabled in the regular order. Option must be additionally
purchased.
Page 94 of 192
Version 6.03, May 2017