LXNAV LX80XX User Manual page 85

Operating Modes
5.1.11.4.4 AHRS Mode
To activate AHRS an activation code must be purchased.
The AHRS option can be activated on the LX80/90xx. For more information refer to:
5.1.11.11.
The Pitch offset can be adjusted in the AHRS menu on the LX80/90xx device.
For competitions the artificial horizon can be disabled on the LX80/90xx device in
the AHRS menu. When the artificial horizon page is active a BFION event is
written to recorded flight for verification purposes.
5.1.11.4.5 Flarm radar display
Flarm Mode will display a map of the relative positions of Flarm targets that are within
When you press either the upper or the lower button, you can see focus on ID
range.
or zoom. Press on the middle button will move focus from one to the other.
Pressing up/down (upper/lower) buttons, when focus is active, will can change the
zoom level or switch between the active targets.
Data from a selected Flarm object can be seen in 4 corners, such as: Flarm Id, Distance,
Vario and Relative altitude (Above / Below). There is also an indication of how many Flarm
objects are present displayed as: TX/number.
5.1.11.4.5.1 Flarm Warnings
Regardless of which Mode you are in, if a Flarm target triggers an urgent (third warning
level) or important (second warning level) warning then the screen will change to the Flarm
warning mode automatically.
Page 85 of 192
Version 6.03, May 2017