LXNAV LX80XX User Manual page 56

Operating Modes
A label consists of two selectable values: upper label and lower label. If you prefer to have
labels in single line, the single label checkbox should be checked. A label can also be
coloured. Check the Colorize label item.
background when the waypoint is within range with the current MacCready settings and
with a yellow background when waypoint is within reach with MacCready setting zero. No
background is shown if the waypoint is not reachable.
The label is selected from following options:
 Name: waypoint name is shown. The name length item controls how the name is
displayed.
 Code: will display the ICAO code or short name.
 Elevation: shows waypoint elevation.
 Arrival altitude shows arrival altitude taking into account current MacCready setting,
safety altitude and current wind. Due to complexity of the calculation it will not take the
wind profile into account.
 Required altitude shows how much height is needed to reach the point. Required
altitude takes into account current MacCready setting, safety altitude and current wind.
Due to complexity of the calculation it will not take the wind profile into account.
 Required Mc gives an estimate of the maximum MacCready value which we can use to
reach the point.
 Required L/D shows the required glide ratio to the point taking into account the safety
altitude.

Team code: shows the team code for that waypoint.
 Frequency will display the point frequency, if available.
Define minimum runway length and minimum runway width to filter our too short
and too narrow runways. Such landing places will be shown in nearest list anyway, but they
will be marked with red cross to indicate, they are not usable.
Press the DEFAULT button to reset these settings back to default.
Coloured labels are drawn with a green
Page 56 of 192
Version 6.03, May 2017