Lcd And Usb-D Vario Indicator; Bridge 232 - LXNAV LX80XX User Manual

Operating Modes
5.1.11.5

LCD and USB-D Vario indicator*

This is type of the older vario indicator. An LCD vario indicator or USB-D vario indicator
consists of:
 Needle
 Two numerical displays (upper and lower).
 Labels and indicators.
These following functions can be set (see next picture):
 Needle: vario needle (Vario, SC, Netto or Relative).
 SC Ring: Displays speed command at all times.
 Upper Numeric Display: Integrator, time, flight time, task remaining time. Upper line;
the parameter displayed can be configured in both Vario and SC modes.
 Vario Mode Indicator: Shows current flight mode (vario or speed command).
 Lower Numeric Display: Altitude (NN altitude), Distance (distance to the navigation
point), Glide diff. (final glide altitude difference), Speed (TAS), Leg speed (speed on
leg), QNH (ft) (NN altitude in ft), Flight levels. Lower line; the parameter displayed can
be configured in both Vario and SC modes.
The labels will automatically be displayed depending on the current function. The BAT
warning will be displayed when the supply voltage is below 11 volts.
LXNAV is highly recommending upgrading old LCD vario indicators to latest
technology vario indicator unit. Please contact local dealer or LXNAV for more
details.
5.1.11.6

Bridge 232*

Bridge 232 is an external device which is sold separately and is used to output NMEA data or
to connect radio or transponder to the system.
Page 87 of 192
Version 6.03, May 2017