LXNAV LX80XX User Manual page 53

Operating Modes Version 6.03, May 2017
Depending on when your device was manufactured it may already contain the new maps
(CITv2). Installed maps can be seen in "SETUP-ABOUT" dialog (after installing version
6.0+).
You will see "Installed maps: CITv1, CITv2 (used)", if you have newer maps installed. If not
then it will state "CITv1 (used)".
5.1.6.1.2.1 CITv2-install procedure
If CITv2 is not preinstalled then you will need to verify that enough free space is available
on your device before installing CITv2 maps.
Installation on device is as follows:
1. Verify that you have enough available free space on internal memory by going to Setup-
>Password and enter 00111. Verify that "FreeMem CF" value displayed is at least 3.8
GBytes.
2. Download CIT files from:
https://my.pcloud.com/publink/show?code=kZiiy0ZzEanvinK8pQ0dYferQPHo4Htxu7V
These files will also be automatically verified while being copied to your device. To prevent
discovering a faulty download "on site" you can (optionally) verify downloaded files on your
PC using a tool like HashCheck http://code.kliu.org/hashcheck/
After installing HashCheck you can double click on checksums.md5 file to automatically
trigger verification of downloaded CIT files.
Verification of downloaded files with HashCheck tool.
3. Copy downloaded CIT files to USB or SD and use "Safely remove hardware or eject
very important!
media" ( ) before removing the SD or USB from the PC. This step prevents
Page 53 of 192