Table of Contents
Advertisement
LX9000 Version 2.6
5.1.12.6
AHRS
When AHRS device is connected to the system, this menu is used to calibrate AHRS for
installation error.
Place you glider in levelled position and press LEVEL button. You can also modify pitch only,
if you rotate PAGE UP/DOWN rotary knob.
5.1.12.7
NMEA Output*
The LX9000 is capable of outputting position data sentences in NMEA format for use by
other devices.
Data is divided into three groups:
•
GPS data will output all GPS-related data such as time, longitude and altitude.
•
LX9000 data will output all variometer-related data such as vario, MacCready and
ballast.
•
Flarm data will output all Flarm-related data.
The NMEA baud rate will be always 19200 bps; any other settings are ignored.
5.1.12.8
Engine Noise*
The current engine noise level is shown as a progress bar. Use this menu to display your
current engine noise.
Page 58 of 130
September 2011
Advertisement
Table of Contents
