Airspace - LXNAV LX80XX User Manual

Operating Modes
5.1.5.3

Airspace

Select the Airspace menu item and press the SELECT button.
airspace databases/files will be shown on screen. The distributed airspace databases are
shown first followed by user airspace files, followed by airspace file on SD card and at the
end are shown airspace files on USB stick.
Select the required airspace and press SELECT. If a check mark is shown in front of an
airspace item, this airspace file will be shown in the graphics and used for proximity
calculation, when enabled.
Button labels vary depend on airspace location. For distributed airspace, only buttons
SELECT and EDIT are available. For user airspace files stored on main display unit, button
DELETE, TO USB and TO SD are added.
To delete airspace file select the airspace item and press the DELETE button. Delete action
must be confirmed. Only user airspace files can be removed.
Press TO USB button to copy selected airspace to USB stick. Press TO SD button to copy
selected airspace to SD card.
When airspace file from SD or USB is highlighted LOAD button is displayed. Press LOAD
button to upload selected airspace to main display unit. Loading the airspace doesn't mean
enabling it. If you wish to enable, please repeat the SELECT procedure as written above.
When an airspace file from USB or SD card is selected, it will be available only, if
SD card or USB stick is inserted in main display unit.
Selecting airspaces on SD card or USB allows you to create portable profiles,
which can be transferred from one device to another device.
5.1.5.3.1 Edit Airspace
It is also possible to edit an airspace file. Select an airspace item and press the EDIT
button. A list of all airspace zones in this database/file will be shown. Use the page selector
to scroll through the items one by one or the zoom selector to move up or down for a whole
page. At the bottom of page, a map with selected airspace zone is drawn.
Page 37 of 192
Version 6.03, May 2017
A list of all available