LXNAV LX80XX User Manual page 80

Operating Modes
5.1.11.4.1 Indicator setup on the LX80/90xx device
Numeric screen can be also set on the main display unit.
In setup you can define navboxes (four user customizable numbers) for each line separately.
They can be configured as:
Average vario, Time, Flight time, Task remaining time, Netto value, Outside temperature,
Altitude, Distance to goal, Arrival altitude, TAS, last 60 seconds speed, Altitude in ft, Flight
level, Thermal average, IAS, Voltage, Average netto, Height, Total altitude, Altitude IGC.
Navboxes set in the first and second line are also shown on the Thermal mode
page.
Vario or SC needle can be set to: Vario, Sc, Netto or Relativ.
All settings can be tested by pressing DEMO button. G force can be reset by RESET-G
button
V8/V80/I8/I80 are not changing screen when toggling between cruise and climb
mode.
Number of navboxes can be set only on the vario indicator itself in the menu
SETUP->INDICATOR.
Page 80 of 192
Version 6.03, May 2017