Flight Recorder; Version 6.03, May - LXNAV LX80XX User Manual

Operating Modes
5.1.2

Flight Recorder

The main display unit has a built-in flight recorder fully approved by the IGC (a sub-
committee of the FAI) and will produce secure flight records that are acceptable for all FAI
requirements including world records.
Select the recording interval and enter the pilot name.
ballast is specified in kilograms of water (see Chapter 5.1.9.5). If the system is used
in two-seat aircraft the name of the co-pilot may also be entered.
There is no setup for glider type. Glider type is defined in the Polar and Glider
setup (see Chapter 0).
There are very few settings for the flight recorder compared to other instruments.
This is because main display unit will record all additional data such as wind,
speed and vertical speed by default.
If a new pilot is entered, upon exiting the dialogue the message
profile with this pilot?"
For more information about profiles see Chapter .
User can also enable options log other aircrafts data(Flarm data) and flap position.
will be asked. Answer YES if you want to quickly add a new profile.
Page 32 of 192

Version 6.03, May 2017

Pilot weight is important if
"Do you want to create new