Restarting Task; Over Turn Point - LXNAV LX80XX User Manual

Flying with the System
On next valid start, task will advance to first point automatically and message "Task started"
will be displayed.
7.2.2

Restarting Task

If for some reason you decide to abandon the task and you would like to restart the task go
to task mode and press any button. In top row the RESTART button is shown. Press it.
You have to confirm restarting of the task. Once the task is restarted navigation will be
changed back to start point.
7.2.3

Over Turn Point

When a turn point observation zone is reached the message
and the task will auto advance to the next turn point if the Auto next option was selected
(see Chapter Error! Reference source not found.).
When the Auto next option was not selected the message NEXT will be displayed. Press
the associated button to advance to the next turn point. If for some reason you missed this
message you can always advance the task to the next turn point by pressing the NEXT
button. Go to task mode. In the upper row the NEXT button is shown. Press this button
and navigation will be advanced to next turn point.
In case you did not reach turn point and you wish to continue navigation towards the next
point anyway press the NEXT button.
Page 170 of 192
Version 6.03, May 2017
"Inside zone"
will be displayed