LXNAV LX80XX User Manual page 120

Operating Modes
Map mode
In map mode, airports are selected directly on the map. Rotate PAGE selector knob to
select an airport.
Details of selected airport will be drawn next to it. In upper-left corner of screen current sort
method is shown. There are two possibilities, distance sort or bearing sort. Press SORT
button to change it.
History mode
History mode shows all previously selected airports and additional two points: take-off
location and soaring begin location (not shown on picture below).
Use PAGE selector knob to select desired airport. Press GOTO to start navigation to it.
If you are flying a free cross-country flight and you wish to finish it under the OLC
rules, you can select a waypoint called Soaring Start, which will show you where
to finish the task.
Page 120 of 192
Version 6.03, May 2017