LXNAV LX80XX User Manual page 83

Operating Modes
5.1.11.4.2.5 Display
Automatic Brightness
If the Automatic Brightness is checked then the brightness will be automatically adjusted
between the minimum and maximum parameters set.
unchecked then the brightness is controlled by the brightness setting.
Minimum Brightness
Use this slider to adjust the minimum brightness for the Automatic Brightness option.
Maximum Brightness
Use this slider to adjust the maximum brightness for the Automatic Brightness option.
Get Brighter In
The user can specify in which time period the brightness can reach the required brightness.
Get Darker In
The user can specify in which time period the brightness can reach the required brightness.
Brightness
With the Automatic Brightness unchecked you can set the brightness manually with this
slider.
Night Mode Darkness
Set the percentage of the brightness to be used after a press on the NIGHT mode button.
5.1.11.4.2.6 Files
The Files menu allows you to upload FlarmNet database.
5.1.11.4.2.7 Password
There are several system passwords which run specific procedures as listed below:
RESET TO FACTORY DEFAULT
AUTO ZERO
REPORT TO SD CARD
FORMAT INTERNAL MEMORY (all data will be lost)
To enter the code, you have to select the number and long hold the lower push button.
Repeat the procedure also after entering the last number.
5.1.11.4.2.8 ABOUT
Information about software versions of indicator's part and the sensor box.
If the Automatic Brightness is
00666
01043
00111
32233
Page 83 of 192
Version 6.03, May 2017