Setup Mode; Qnh And Res; Qnh - LXNAV LX80XX User Manual

Operating Modes

5.1 Setup Mode

In the setup menu users can configure the main display unit and connected devices. Turn
the bottom-right knob - PAGE selector - or press the UP/DOWN arrow on the remote stick to
select the appropriate setup item. Turn the bottom-left knob - ZOOM selector - or press the
LEFT/RIGHT arrow on the remote stick to move faster over menu.
button or push middle multi-directional button on the remote stick to enter a menu. A
dialogue or sub-menu will open.
The setup menu is slightly different on the rear seat device as not all options are applicable.
Items which are marked with an asterisk (*) are available only in the front seat
setup menu.
5.1.1

QNH and RES

Turn the bottom-right knob to select the required entry field. Press the EDIT button and
start editing the value.
5.1.1.1

QNH*

Using this feature it is possible to offset the altitude datum which could have changed due
to pressure changes during the flight. Since changing the QNH influences the indicated
Page 30 of 192
Version 6.03, May 2017
Press the SELECT