Flap Tape; Map - Synthetic View - LXNAV LX80XX User Manual

Navigational page layout

6.3.19 Flap tape

Flap tape displays current and required flap position. Scale of flap tape matches airspeed
tape.
Magenta pointer shows required flap settings. White pointer shows selected flap position.
Selected flap position band is coloured with green colour, when matching flaps are set.
When wrong flaps are set, then selected flap band will be coloured red.
When property "Show entire tape" is set, all bands are visible and have equal size regardless
of their configured speed bounds.
If Snap Sensor Value is ticked, flaps will also show current flaps setting and
required flaps setting. To calibrate flaps settings properly, refer to the following
chapter: 5.1.11.15
6.3.20 3D Map – synthetic view
Synthetic view shows 3D terrain including rivers, streets, roads and airspaces. Flarm traces
can also be seen in the 3D view.
®
Page 159 of 192
Version 6.03, May 2017