LXNAV LX80XX User Manual page 40

Operating Modes
Multiple files can be selected. All checked files will be shown on the graphics page and used
in the near mode calculation, if the waypoint is of the proper type (airport or outlanding
place). However, only one file can be the active file. The active file is primary used for task
creation. Task can be loaded only from the active file.
When a waypoint file from USB or SD card is selected, it will be available only, if
SD card or USB stick is inserted in main display unit.
Selecting waypoint files on SD card or USB allows you to create portable profiles,
which can be transferred from one device to another device.
Press the ACTIVE button to mark the selected file as active.
Press the DELETE button to remove the selected file from the internal storage of main
display unit.
If WiFi option is presented, button TO MAIL will be visible. Press this button to send
selected file to email.
If waypoints files from the SD or USB are selectable, button LOAD is visible. Press the LOAD
button to upload selected waypoint file to internal storage.
If waypoints file from internal storage is selected button SAVE is visible. Press the SAVE
button to save waypoints to the SD Card or USB stick. The save dialogue will be opened.
Page 40 of 192
Version 6.03, May 2017