LXNAV LX80XX User Manual page 131

Operating Modes Version 6.03, May 2017
Press the CHAR>> button and the cursor will move to the second letter. Use the PAGE
selector knob to select the second letter. If you want to return to the first letter turn the
ZOOM selector knob anticlockwise.
Repeat this procedure until your desired point is selected. Press the SELECT button to
complete this selection. If you do not know exact name of a point just select the first letter
and press the SELECT button. Now scroll to the desired point using the PAGE selector
knob. Press the SELECT button once more to complete this selection.
The task edit dialogue should now look like the screen below. The letter "S" indicates you
entered the start point and a letter "F" indicates you entered the finish point.
Move the cursor down to the next empty point and repeat the above procedure until the
entire task is entered. Next to task name bearing to point and distance from previous point
is shown. When on ground time needed from start is shown in last column. On ground
calculation for time needed is based on MacCready theory only and it does not take into
account wind. If task time is entered, delta time (tDelta) is displayed in last row.
Once task is started, needed time will change to estimated time of arrival to point.
If you would like to change source for selection of waypoints, which are used to create task,
press SOURCE button and select appropriate source. There are three options available:
active waypoint file, all selected waypoint files or waypoint files and airports.
Page 131 of 192