Version 6.03, May - LXNAV LX80XX User Manual

Navigational page layout
 New button will add new point. A new point can also be copied from the airports
database.
 Delete button deletes the selected point.

Move action is used in assigned area tasks to move the navigation point inside the
selected assigned area.
 Restart is used to restart a task. This action is available only when flying.
 Cycle is available when multiple start points are defined and is used to change, cycle
through start points.
 Arm, Start or Next option is used to start a task or to advance to the next turn point.
When any of the eight buttons are pressed, the functions for the buttons are shown. If a
selected button is pressed once more the selected action will take place.
Press the MORE>> button to see more options.
behaviour is slightly different. When the check button is pressed on the remote stick a
menu will appear instead of the button functions.
By using the UP/DOWN key the pilot may select between options.
Button functions or the remote menu will disappear automatically after 10 seconds
if no further action is taken.
If the remote stick is available the
Page 138 of 192

Version 6.03, May 2017