Task - LXNAV LX80XX User Manual

Operating Modes Version 6.03, May 2017
point your flight forms a triangle according to FAI rules. The Optimisation dialogue is used
to define the look and feel.
Check the Show optimization item to enable display of the optimised track.
Optimization colour and width defines the colour and width for these lines.
If Show optimized triangle is checked also lines for the largest optimised triangle are
shown. Please note this might not be a triangle according to FAI rules.
The FAI Area group defines how the FAI area is drawn. Select the Colour item to change
the colour of the FAI area. Use the ZOOM selector knob to change transparency of the
area. 100% means completely transparent and only the outline will be drawn. 0% means
completely solid (not recommended).
Check the Show km lines item to see lines which indicate what will be the size of the
completed triangle.
These lines will always be plotted in kilometres scale regardless of the Units value.
5.1.6.7

Task

Use this dialogue to define how a task is drawn in task mode.
Task colour defines the colour of task lines. Obs.zone colour defines colours for
observation zones. Use the ZOOM selector knob to change transparency of area. 100%
Page 59 of 192