Flaps; Battery Types - LXNAV LX80XX User Manual

Operating Modes
5.1.11.15

Flaps*

When flap sensor is installed, use this menu to set flaps position. Use page selector to select
desired flap position. Press SET button to set position. Continue with procedure for all flap
positions.
When all flap positions are set, a green dot will be displayed with current flap position.
If flap labels are not set yet, press EDIT button to name flap label. Flap labels must me
entered with increasing speed range. It is recommended that flaps labels are set together
with speed range in Polar and Glider setup. See Chapter 0 for more details.
It is also possible to toggle between cruise and climb mode using flap sensor in this case
there is no need to define digital input for SC.
5.1.11.16

Battery Types*

This menu defines type of battery being used. Selecting type of battery is important in order
to correctly show low battery warnings.
Use Type combo to select appropriate type of battery (Lead Acid, LiFe, LiPo, custom). You
can see empty, low and full voltage for the selected type of battery. In case of voltage drop,
because of cable lengths, you can set up voltage offset there to the current voltage
measured.
Page 98 of 192
Version 6.03, May 2017