LXNAV LX80XX User Manual page 61

Operating Modes Version 6.03, May 2017
Checking Show Flarm object will enable display of aircraft detected by FLARM.
Colours are designed to present three values. The colour for aircraft more than 100 meters
above your current altitude is defined by the Above Colour item. The colour for aircraft
more than 100 meters below your current altitude is defined by the Below Colour item.
The colour for aircraft that are less than 100 meters below or above your current altitude is
defined by the Near Colour item.
When a signal from a particular aircraft is lost the aircraft remains blinking on the screen for
the duration defined in the Lost device after item (default 120 seconds). After that time
the aircraft symbol will not be displayed.
Show labels combo box defines for which Flarm objects altitude and vertical speed are
displayed next to the aircraft symbol. The user can modify size, font style and colour.
Select the Font style and colour item. Use the ZOOM selector knob to modify colour and
the PAGE selector knob to modify style.
It is possible to display the flown path of tracked aircraft. Path colour and Path width
define width and colour of paths. Show paths combo box defines for which Flarm object
paths are going to be visible.
Symbol size defines size of symbol of Flarm object.
Check Show PCAS to see non-directional traffic on navigational screen. Non-directional
traffic will be draw with dotted circle at received distance from aircraft position. PCAS
timeout is setup separately in next time spin control.
Page 61 of 192