LXNAV LX80XX User Manual page 88

Operating Modes Version 6.03, May 2017
See installation manual for details on wiring of Bridge 232.
Once bridge 232 is plugged into 485 bus, Bridge Sn.:SNxxxx will appear in Hardware menu.
First functionality must be defined. Based on functionality, dialog will change and display
related items for selected functionality.
In NMEA output define baud rate at which NMEA sentences will be transmitted. Select
desired NMEA sentences. NMEA data is exactly the same as described in chapter 5.1.12.12.
Radio bridge is used to operate radio through main display unit. First type of connected
radio must be selected. At the moment following types are supported: KRT2, Trig TY91/92,
ATR833, Becker 620X. Support for other types is in progress. Please consult LXNAV for more
details.
Check Auto set target frequency, if you want to automatically select frequency, when
new target is selected in navigational mode. Ticking show target warnings will trigger
warnings generated from the device (example: radio is too hot).
Transponder bridge can operate the transponder with the main unit. Supported
transponders are: Becker BXP6402 and Trig TT21/22.
ICAO code, ID and SQUAWK could be set and send from LXxxxx device to the transponder.
It can also show target warnings from transponder.
Page 88 of 192