Mark - LXNAV LX80XX User Manual

Navigational page layout Version 6.03, May 2017
Press EDIT to edit data for the selected zone. Airspace type, class and altitude borders can
be modified in this dialogue.
6.2.1.5

Mark

If you press the MARK button a new waypoint will be created with the current latitude and
longitude and elevation based on the terrain database. The waypoint name is generated
from the current date and time separated by the minus character and preceded by an
underscore.
Waypoint data can be modified. Refer to Chapter 5.6.1 for more details. Press the OK
button to save a marked waypoint or press CANCEL to exit without saving. Press GOTO
button to navigate immediately to selected point.
Page 143 of 192